CategoriesConcrete Rebar Corrosion Detector TC600
Featured |
Coating Thickness Gauge TIME2510
$0.00 |
 |
Surface Roughness Tester TR100
$800.00 |
 |
TIME Portable Hardness Tester TIME5104 (TH174)
$0.00 |
 |
Ultrasonic Thickness Gauge TIME2130 (TT300)
$0.00 |
 Click to enlarge |
|
Features:
TC600 rebar corrosion detector is designed for assessing the corrosion of the reinforced concrete structure and components by half-cell potential method, the electrode is passed over the surface of the concrete and the potential voltage difference is recorded, then the corrosion of rebar is assessed
Non-destructive testing the corrosion in rebar
Detection of the corrosion condition of the rebar accurately and conveniently by field potential Measurement
Possibility to store, view, delete data and transfer all readings to PC with USB interface and Serial port
Faster and more accurate processing of data, presentation of test area and reading as numbers or graphics
Display of measurement values in 9 grey-scale or colorful graphics
Permanent copper/copper sulphate reference electrodes to measure electrical potentials
Technical Specification:
|
Measuring method |
Potential measurement |
|
|
Measuring range |
±1000mv |
|
|
Resolution |
1mv |
|
|
Memory |
Mass storage |
|
|
Space between testing points |
1～100cm adjustable |
|
|
Interface |
RS232 and USB |
|
|
Power supply |
AA batteries (LR6)×6 |
|
|
Operating temperature |
-10℃～+40℃ |
|
|
Relative humidity |
＜90%RH |
|
|
Dimensions |
Main unit |
210mm×153mm×90mm |
|
Probe |
Φ30mm×120mm |
|
|
Weight |
Main unit |
880g |
|
Probe |
100g |
|
|
|
|||||
|
|||||
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
