CategoriesVibration Tester TIME7240 (TV400)
Featured |
Coating Thickness Gauge TIME2510
$0.00 |
 |
Surface Roughness Tester TR100
$800.00 |
 |
TIME Portable Hardness Tester TIME5104 (TH174)
$0.00 |
 |
Ultrasonic Thickness Gauge TIME2130 (TT300)
$0.00 |
 Click to enlarge |
|
Features:
Three channels(CH1, CH2 and REV) are available, the vibration of any two of the
three directions including X axis, Y axis and Z axis can be tested.
Five measuring modes: three parameters measuring（AVD mode）, dynamic
time domain waveform(TIME mode), dynamic spectrum measurement
（FFT mode）, data sampling（Sample mode）, rotation speed
measurement( REV mode).
The peak value of acceleration, velocity and peak to peak value of displacement
are measured.
Preset the filter’s cut-off frequency of pass band, frequency step is 100Hz.
Dynamic display the waveform in real time.
Dynamic display the vibration frequency.
Continuous data sampling for 20 seconds
With powerful data management:50 points stored, the measured data of each point
is stored in files, users can review the vibration parameters, waveform, frequency
data sampling and rotation speed
Connected with printer to print out measured data, waveform and spectrum chart
Technical Specification:
|
Sensitivity of Acceleration transducer (mVrms/g) |
Acceleration (m/s2) |
Velocity(mm/s) |
Displacement(μm) |
|
1.0~9.9 |
1-2,000 |
1-2,000 |
10-20,000 |
|
10~99 |
0.1-200 |
0.1-200 |
1-2,000 |
|
Frequency range |
Acceleration:5Hz~10000Hz |
||
|
Velocity:5Hz~1000Hz |
|||
|
Displacement:5Hz~500Hz |
|||
|
Rotation Speed |
300~60000RPM |
||
|
Error |
±5% |
||
|
Battery |
Li battery(continuous working for 8hours) |
||
|
Operating temperature |
0℃~40℃ |
||
|
Humidity |
≤80%RH |
||
|
Dimensions(mm) |
223×122×38 |
||
|
Weight(g) |
606 |
||
|
|
|||||
|
|||||
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
